In this post, we introduce the Ammonia Leak Detection Tape.
1. Specification of ammonia leak detection tape
The length is uniformly 30m, and it is sold in two widths: 30mm and 50mm. If you require other specifications, please contact our company.
※ Ammonia gas (basic gas) cannot be detected by acid-alkali leak detection tape
※ Detection range is > 100ppm and response time may vary depending on flowrate
and ammonia concentration.
※ Tape discoloration may occur due to water, but interference by moisture in the air is minimized.
Recommend indoor use.
2. Performance test of ammonia leak detection tape
a) Ammonia concentration effect at 100 cc/min
Color change at different ammonia concentration @ 100cc/min
b) Flowrate effect at 100 ppm ammonia
Color change at different flowrate @ 100 ppm ammonia
c) Moisture effect
When the ammonia detection tape is exposed to the atmosphere, it is observed to change from light yellow to dark yellow due to atmospheric moisture. However, after a few days, it appears that there is almost no effect from moisture.
3. Sales references
a) Customers
– HD Hyundai Heavy Industry
– Power Plants, DooSan Enerbility
– Semiconductor Specialty Gas/Precursor manufacturing Companies
– Hydrogen manufacturers
– Petrochemical/Fine Chemical Companies, etc.
b) Applications
– Chemical resistant pumps, valves, flanges, reactors, chemical storage tanks, etc.
The leak detection tapes manufactured by our company are supplied to many industries handling hazardous chemicals, including semiconductor, display, power plants, and chemical companies, and etc.